tone
Scooter Rider
Geordie Racer !
Posts: 69
|
Post by tone on Dec 7, 2009 14:00:28 GMT
Hi guys,
Whilst stripping the rear brake caliper down to replace the seals, I have mislaid the small rubber o-ring seal which sits between the caliper halves.
Its the small o-ring which seals the brake fluid route from one half of the claiper to t'other.
I cant find it as a part on the fische so does anyone know of a parts number for it. Or alternatively do i just have a look for a similar size seal and try that ?
Cheers Guys Tone
|
|
|
Post by teejayexc on Dec 7, 2009 14:47:13 GMT
Hi Tone, the seal you are talking about is known as a doughty/dowty, (sp), washer.
Agri Merchants, Motor Factors sell 'em in bags, cheap as chips. You'd obviously need to take yer caliper in to check for size but worth a punt, before going to the Stealers?
trev
|
|
tone
Scooter Rider
Geordie Racer !
Posts: 69
|
Post by tone on Dec 7, 2009 22:05:06 GMT
Spot on Trev,
Cheers for that. Ill pop along to the local guys then instaed of visting the Stealers.
Tone
|
|