|
|
Post by johnny196969 on Aug 16, 2009 12:15:01 GMT
I have just bought a 1993 600 Diversion for my girlfriend, the problem I have is where do all the fuel lines go! everywhere seems ok apart from the lowest outlet on the fuel tap, which has had a tube on previously but nothing on now?
|
|
|
|
Post by amorti on Aug 16, 2009 14:40:21 GMT
 the hose part 28 is for the vacuum, it runs to a stub bolt on the intake port of cylinder 2 (at least I think it's 2, ie. one in from left). Without it, your fuel tap won't open and your bike won't run! |
|
|
|
Post by johnny196969 on Aug 16, 2009 15:47:28 GMT
Hi, ive looked again, and according to the haynes manual, hose 37 from the fuel pump goes to the No2 carb vac stub?
|
|
|
|
Post by CD on Aug 17, 2009 8:38:49 GMT
The fuel tap is either normal or reserve. ON/OFF a vacuum switch that holds the tap open when the engine is running.
There will be:
# Fuel out from the tap to fuel pump
# Vacuum (to one of the carbs) from the tap
# Overflow/vent that goes down the back of the engine to drain onto the floor
I think that's it.
|
|
|
|
Post by johnny196969 on Aug 17, 2009 17:21:51 GMT
I have the following pipes.....
fuel tap x2
pump x3
canister x3
HELP!!!
|
|
