rear brake

[justpurple]

hi guys
im having trouble need some advise ,recenlty tried to pressurerise and bleed my back brake on my divvy 600 1995 n model ,i have replaced rear master cylinder and seals still cannot get adiquate brake can anyone advise please .

regards justpurple

[CD]

First make sure the caliper isn't siezed. If its just air in the system, try this...

Take the caliper off the bike and hold it above the master cylinder to bleed it. When thje bubbles seem to stop coming out, tie the brake pedal down overnight with the caliper hanging below. Any fine bubbles can then rise towards the master cylinder.