|
|
Post by iooi on Apr 25, 2007 20:37:34 GMT
Seems when i have ignition on and bike stood on side stand, engine off. The rev counter will pop upto 2,000 then drop to 0 for 5 secs then do the same again... Stays like this till i pop stand up.
Anyone elses do the same ?
|
|
|
|
Post by midlifecrisis on Apr 25, 2007 20:44:18 GMT
Seems when i have ignition on and bike stood on side stand, engine off. The rev counter will pop upto 2,000 then drop to 0 for 5 secs then do the same again... Stays like this till i pop stand up. Anyone elses do the same ? I had a rally Imp that did that, nver did sort it, maybe it was the single splined sproggle grommit ;D |
|
|
|
Post by apricot on Apr 25, 2007 21:00:29 GMT
Perhaps its been possessed by demons? Could happen  If so, sprinkle with holy water (or perrier at a push, but not the lime twist one) and mutter the magic incantation "I'm too young for a Fazer" until the problem subsides! Mystic Ady  |
|
|
|
Post by CD on Apr 25, 2007 21:04:13 GMT
The Divvie side stand has an engine cutout switch to stop the engine if the stand is down with the bike in gear (nice idea). Could be a faulty connection somewhere and the 'tronics dont know what to do with it.
The throttle position sensor also does stuff like that with the tacho. I cant remember the procedure.
|
|
|
|
Post by teejayexc on Apr 25, 2007 21:09:46 GMT
|
|
|
|
Post by Fiasco on Apr 25, 2007 22:22:22 GMT
I think it's a diagnostic code of some sort but not sure which
Anyone got an owners manual, should be in there.
Dave ;D
|
|
|
|
Post by General Gman on Apr 26, 2007 7:35:59 GMT
Batter the thing into submission with a suitably sized twattin stick.
|
|
|
|
Post by iooi on Apr 26, 2007 8:31:04 GMT
Will give the tps thing a try at weekend.
I know something is not right with either sidestand or clutch switch as it will not start with sidestand down, with either clutch in or out. But will start in gear with clutch in, which would point to sidestand switch to me.
|
|
