|
|
Post by pebbles on Mar 24, 2007 17:27:17 GMT
had to replace the original exhaust system on my 600 divy
my local dealer recomended a motad 4 into 1 system
good thinks i ,once fitted can no longer use my givi monolock
panniers the exhaust can is to high to allow the case to slot on
plus i had to remove support bar the one that went to back of original can and now it looks like the exhaust is going to hit the wheel spindle can someone please HELP
|
|
|
|
Post by HRHpenfold on Mar 24, 2007 18:28:43 GMT
if it is a nexxus 4 into 1
I to have had this problem and the solution was fairly easy to find
I made a extra bracket to lower the silencer an extra 35-40mm, it will lower this amount and still work ok, dont know what u mean about the spindle, it was never a problem on mine, i never liked the
dunno about any other systems, but personally i would fit the system that jools has just had fitted to hers, which replicates the origonal 4 into 2, having said that the divvie i have has excellent exhorsts, so should be a long time before i go down that rout ;D
|
|
|
|
Post by General Gman on Mar 24, 2007 23:07:38 GMT
Wot e said....
I can confirm that Jools's pipework is top quality.
looks good, and sounds great when riding ;D
|
|
|
|
Post by Dame judgejools44 on Mar 24, 2007 23:25:37 GMT
Thanks all....and yes my pipework is fantastic...LOL!!
|
|
|
|
Post by iooi on Mar 25, 2007 8:48:37 GMT
Jools.
Where did you get your from then ?
Looking at replacing mine.
Seen some downpipes on ebay at £149, but then the end cans are £249.... To me might as well just get the Motad 4-1 as its cheaper.
Also are the exhaust bolts at the front allen keys ?
|
|
|
|
Post by suzukikidontheloose53 on Mar 25, 2007 11:00:05 GMT
The exhaust bolts on mine(1999) were allan keys but due to corrosion some of them were just round holes  Cost £28 for a new set of 8 from Yam dealer  |
|
|
|
Post by pebbles on Mar 25, 2007 15:40:42 GMT
went to the local bike dealer and he got the exhaust from motad
who do not keep them in stock so u wait 7 days for them to arrive
£354 it does not take long to see that they the biggest pile of carp
going one pipe does not even have a pinch bolt ,they blow like hell
sounds good tho but not mot friendly, the center stand hits the bottom of the exhaust and two up u stand a good chance of hitting the can on the wheel spindle,there is so much oil on the inside and out that while u are burning it off someone calls the fire brigade other than that my 8 year old rhodesian ridgeback
could have made better at night school
|
|
|
|
Post by iooi on Mar 25, 2007 17:23:49 GMT
Mmm, Scrap that idea then...
Might just try new down pipes as its the collector bits that are the worst. I can live with scratched,dented and rattly cans for now.
|
|
|
|
Post by pebbles on Mar 25, 2007 20:17:34 GMT
£28 pound for 8 nuts how the hell can they justify that
|
|
|
|
Post by suzukikidontheloose53 on Mar 25, 2007 20:57:59 GMT
I was a bit taken aback myself and got them to check it ,but it was £3 odd each plus vat  |
|
|
|
Post by pebbles on Mar 25, 2007 21:11:30 GMT
will just have to take your word on jooles pipework
have not met the young lady yet
|
|
|
|
Post by pebbles on Mar 25, 2007 21:13:53 GMT
if i was to take all the nuts off my div and sell them for £3
each i will have enough for a new blade ,yes cracked it off to join
the blade owners club bye
|
|
|
|
Post by Fiasco on Mar 25, 2007 21:36:51 GMT
will just have to take your word on jooles pipework have not met the young lady yet Jools and Lady in the same sentence???  Dave ;D |
|
|
|
Post by pebbles on Mar 25, 2007 21:45:22 GMT
made a bracket to drop the exhaust and fixed it to the other
side of the alloy bracket after undoing the front pipes
and middle section found it would pull over enough
now it clears the main stand if doing this was not a good idea please tell me now
|
|
|
|
Post by pebbles on Mar 25, 2007 21:47:05 GMT
i love u all now put my karma up or else
|
|
|
|
Post by General Gman on Mar 25, 2007 21:50:47 GMT
will just have to take your word on jooles pipework have not met the young lady yet Jools and Lady in the same sentence??? Dave ;D Was the young bit that made me choke.... ;D ;D |
|
|
|
Post by apricot on Mar 26, 2007 0:20:39 GMT
"Was the young bit that made me choke.... ;D ;D"
Apparently Michael Jackson found the same thing....
Jools, when do I get to see your fantastic pipework? ;D
|
|
|
|
Post by Dame judgejools44 on Mar 26, 2007 1:53:55 GMT
OI!! You're all naughty!! LOL!! Right, I bought a 4-2 Jama downpipes and silencers from Exactrep for £468. They have a website, www.exactrep.co.uk. If you're looking at paying £350'ish for 4-1 motad you may as well stretch the extra £100 for the fab system I bought! ;D Fiasco - You're right I ain't a Lady, but I'm first to admit it ;D GM - Still younger than you! ;D Apricot - You'll see me pipework at Postcombe, its worth the wait! ;D |
|
|
|
Post by alpaholic on Mar 26, 2007 8:30:06 GMT
had to replace the original exhaust system on my 600 divy my local dealer recomended a motad 4 into 1 system good thinks i ,once fitted can no longer use my givi monolock panniers the exhaust can is to high to allow the case to slot on plus i had to remove support bar the one that went to back of original can and now it looks like the exhaust is going to hit the wheel spindle can someone please HELP This was my solution to the 'melted case' problem. www.ashdownsailing.org.uk/givi.JPG |
|
|
|
Post by pebbles on Mar 26, 2007 10:32:56 GMT
clever man harley where did u get that bracket from
|
|
