Instrument/Binnacle Light

[stu]

Is there an easy way to change the bulb in the instrument binnacle? It seems the only way is to take the whole fairing off, take out the binnacle, and then get busy with the small screw drivers.

Does anyone have an easy way without the use of a sledge hammer?

My second Divvy Six, and the bank balance has decided that I need to do my own basic spannering, and I want to know when I run out of Petrol on the M40.

[teejayexc]

Hi Stu, this thread might help ;

diversionclub.proboards74.com/index.cgi?board=general&action=display&thread=1189882232

It's a fiddly job but can be done without resorting to taking the whole fairing off.

HTH Trev

[stu]

Thanks for that took the screen off and the black fairing but struggling with the binacle I think its a longer job than I'd anticipated.

[CD]

If you take out all of the rubber nuts, which take the screen screws, the inner binnacle should come out with a bit of fiddling about. I found it best to push the nuts through. Its best to feed a wire through as they easily get lost in the fairing / under a car / down a drain / etc.