|
Post by paul71 on Jun 28, 2020 19:37:10 GMT
Hi, I'm in the process of building a 97 Xj600 diversion. I bought as a non runner and have made good progress in the rebuild over the months. The airbox was only placed on the bike and whilst working through the parts I noticed there were no pipes attached to the airbox. I'm struggling to see where all the pipes go. I have a pipe that fits from the engine to the front of the airbox but I'm struggling the with the two holes underneath. There is a hole to the left and one pretty much central . I have looked at diagrams and the central hole seems to have a T and then the pipes split off, but to where? The hole to the left, does that pipe just hang down and not connected to anything? On the top of the engine is a pipe around 6 inches long, quite a few bends in it, does this connect to one of the holes in the airbox? Sorry for all the questions but I can't seem to find any information. Any info or pictures would be greatly appreciated.
|
|