|
|
Post by stucooksey on May 4, 2020 11:03:53 GMT
I'm having problems locating a rear caliper for my diversion 600 1991 4br. Have sent new Chinese one for a fzr 400. Any ideas of it will fit or any other that will cheers all
|
|
ianp
CBT failure
Posts: 10 
|
Post by ianp on May 4, 2020 11:44:41 GMT
On my 98 600 I replaced the caliper with one from a thundercat. It's a direct swap and a far better design with the bleed nipples. Only remember that the pads are different before you order them from Wemoto!
Ian
|
|
|
|
Post by kabulcalling on May 4, 2020 12:12:55 GMT
I had the same issue a while back and chose to do a refurb job in the shed. Lucky for me my housemate, of the time, is a motorcycle mechanic and has a nicely kitted out workbench. The airline was very useful for polling out the pistons.
Fitting the seals was a right pain, but once done, I was very happy with the result and if I had to again, I'd give it a go in my own (less well-kitted) shed
|
|
