|
|
Post by uglydave on Mar 27, 2017 18:30:51 GMT
would anyone know what size hex (across the flats) I need to make a tool to hold the front fork damper rods to unscrew the bolt?
|
|
|
|
Post by m40man on Mar 27, 2017 18:56:05 GMT
600 Divvy (the single disk version at least) = 25mm
900 Divvy = 27mm (unless anyone contradicts me!)
Though I've managed without before now. A quick shock with an impact driver can usually loosen it without any special tool.
|
|
|
|
Post by HRHpenfold on Mar 27, 2017 20:54:51 GMT
600 Divvy (the single disk version at least) = 25mm 900 Divvy = 27mm (unless anyone contradicts me!) Though I've managed without before now. A quick shock with an impact driver can usually loosen it without any special tool. You are right 27mm, Some have used a broom handle with the end sharpened into a hex. I have always used an air impact driver, or now a electric impact driver. |
|
|
|
Post by uglydave on Mar 27, 2017 23:42:03 GMT
have used all the above before but like to be ready for the unexpected, thanks
|
|
