|
|
Post by webgringo on Jul 5, 2015 21:08:32 GMT
Yea, its basic, but cant figure out what goes where.
One on each side, so much i found and fiddled with.
Been messing with em to much, way out of where they should be. Right now its shooting up and to the right. What do i turn, and what way ?
|
|
|
|
Post by showaddydadito on Jul 6, 2015 6:39:47 GMT
If it's like the headlight on the Divvy I had you probably need to take the headlight out now and spend a happy few hours trying to relocate the adjuster screws back into their holes. After that you give up and resort to jamming things in until something makes it point the right way and try to fix it there with something sticky.
|
|
|
|
Post by webgringo on Aug 25, 2015 22:21:34 GMT
So, for those who wonder how its done
The headlight adjuster thingys are mounted on the left hand side ofthe headlight unit (vertical adjustment). It sits approximately 8 O'Clock to the bulb housing cover. Turn screw clockwise for beam to go down and anti-clockwise for beam to go up.
On the back right of the headlight unit is the horizontal adjustment. it is diagonally opposite the left adjuster at about 2 O'Clock. Turn it clockwise for right adjustment and anti-clockwise for left adjustment.
|
|
