|
Post by martyn41 on Apr 7, 2015 14:54:36 GMT
Was out on my 600s on sunday and turned bike off via the cut off switch on the handlebars. Since then she will not start.. No lights showing on dash, nothing working, no lights, horn, indicators.... nothing... Fuses ok, power going to and from ignition switch..... I thought the cut off switch would affect the electric power to the engine... but am I wrong in this ? Would a dodgy switch affect all the power ?
|
|
|
Post by crickleymal on Apr 9, 2015 9:25:26 GMT
Try a bit of switch cleaner squirted into the gap around the switch. Some people claim WD40 may work but I prefer the proper stuff (Maplins sell it). Mind you WD40 probably can't hurt in this case. Switch the switch vigourously several times whilst spraying the stuff in there. It could also be complete coincidence and the blue wire is playing up at exactly the same time as you switched off.
|
|