|
Post by brewerswhoop on Dec 8, 2014 13:56:14 GMT
Thinking about fitting blue spots to my '95 900. I've read some of the very useful threads on here, but have a question about master cylinder compatibility.
Is there a m/c that will bolt straight on without modification (other than to brakelight switch connectors), and which has the mirror fitting?
Cheers.
|
|
|
Post by HRHpenfold on Dec 8, 2014 16:08:44 GMT
Thinking about fitting blue spots to my '95 900. I've read some of the very useful threads on here, but have a question about master cylinder compatibility. Is there a m/c that will bolt straight on without modification (other than to brakelight switch connectors), and which has the mirror fitting? Cheers. lots, fazer 600 upto 2003 after that it fits, but may need the mirror boss drilled and tapped if from the half faired version fazer 1000 upto 2005 Xj1200/1300 all models fjr1300 up to I think it was 2006 modern diversion 600
|
|
|
Post by m40man on Dec 8, 2014 17:58:35 GMT
I wouldn't put anyone off doing this, but bear in mind that you could find that the master cylinder/reservoir could clout your screen on full left-hand lock. At least it did on mine, where CD had used an R6 master cylinder. Not much of a problem in general use. For the MOT, I removed the screen to solve the problem - put straight back on afterwards .
|
|
|
Post by HRHpenfold on Dec 8, 2014 18:36:23 GMT
I wouldn't put anyone off doing this, but bear in mind that you could find that the master cylinder/reservoir could clout your screen on full left-hand lock. At least it did on mine, where CD had used an R6 master cylinder. Not much of a problem in general use. For the MOT, I removed the screen to solve the problem - put straight back on afterwards . The fazer one is no bigger than the original! The r1, thundercat or R6 ones are separate reservoir models!
|
|
|
Post by m40man on Dec 8, 2014 18:51:36 GMT
The fazer one is no bigger than the original! The r1, thundercat or R6 ones are separate reservoir models! I know that, My D9 had one - hence my warning about the R6 jobbie
|
|
|
Post by brewerswhoop on Dec 8, 2014 21:23:44 GMT
Thanks guys; a few options there.
|
|