|
|
Post by bigmick1981 on Apr 5, 2014 17:30:47 GMT
So managed to pick up a old 600 diversion rack today which I will need to blast and paint on monday but there are no fitting instructions. Theres a rack and two plates so do any of you guys have pics of where the plates go or a set of fitting instructions I can have a wee peek at ?
|
|
|
|
Post by alan292 on Apr 5, 2014 18:32:29 GMT
So managed to pick up a old 600 diversion rack today which I will need to blast and paint on monday but there are no fitting instructions. Theres a rack and two plates so do any of you guys have pics of where the plates go or a set of fitting instructions I can have a wee peek at ? Hi Mick....the plates attach at the 2 lugs under the panel and the rack attaches to the plate....Ill take a pic tomorrow close up and post it  |
|
|
|
Post by bigmick1981 on Apr 5, 2014 19:27:36 GMT
So managed to pick up a old 600 diversion rack today which I will need to blast and paint on monday but there are no fitting instructions. Theres a rack and two plates so do any of you guys have pics of where the plates go or a set of fitting instructions I can have a wee peek at ? Hi Mick....the plates attach at the 2 lugs under the panel and the rack attaches to the plate....Ill take a pic tomorrow close up and post it Cheers mate will check back for pics , no rush mate just whenever you are out the back |
|
|
|
Post by alan292 on Apr 6, 2014 11:08:31 GMT
Heres a pic taken from underneath the seat Mick.... 
|
|
|
|
Post by Deleted on Apr 6, 2014 11:11:20 GMT
Depends how old your divvy is, you might not need the plate!
|
|
|
|
Post by bigmick1981 on Apr 6, 2014 12:04:11 GMT
Perfect cheers bud but what is the point of these plates then ?
|
|
|
|
Post by bigmick1981 on Apr 6, 2014 12:05:44 GMT
Depends how old your divvy is, you might not need the plate! 1999 ? |
|
|
|
Post by alan292 on Apr 6, 2014 12:40:29 GMT
Perfect cheers bud but what is the point of these plates then ? The plate is used as an adapter because the earlier model had the lugs closer together and at a slightly different angle from what I could gather when I bought mine....without it the rack wouldn't fit.....but this assuming the rack you have bought is the same as mine....the bikes are defo the same...  |
|
|
|
Post by Deleted on Apr 6, 2014 14:09:23 GMT
Yeah earlier models don't need the plate, mine was a 98 and needed it.
|
|
|
|
Post by bigmick1981 on Apr 6, 2014 14:29:52 GMT
Perfect cheers bud but what is the point of these plates then ? The plate is used as an adapter because the earlier model had the lugs closer together and at a slightly different angle from what I could gather when I bought mine....without it the rack wouldn't fit.....but this assuming the rack you have bought is the same as mine....the bikes are defo the same... mines is the renntec luggage rack bud |
|
|
|
Post by alan292 on Apr 6, 2014 20:48:11 GMT
Yup mine too so it should fit the same
|
|
