|
|
Post by bigmick1981 on Nov 6, 2013 11:52:48 GMT
Looking for a rear disk for a 600, the one I have is down at 3.7mm
|
|
|
|
Post by soggybiker on Nov 6, 2013 13:36:14 GMT
May be cheaper to find a back wheel with disk on ebay. A good upgrade to the back brake is a Thundercat 600 back caliper which will fit straight on but you need the Tcat hose as well.
|
|
|
|
Post by showaddydadito on Nov 6, 2013 14:39:42 GMT
I might have one you can have for nowt - I'll check tonite.
Dave
|
|
|
|
Post by bigmick1981 on Nov 6, 2013 17:22:24 GMT
I might have one you can have for nowt - I'll check tonite. Dave That would be fantastic thanks |
|
|
|
Post by bigmick1981 on Nov 6, 2013 17:24:02 GMT
May be cheaper to find a back wheel with disk on ebay. A good upgrade to the back brake is a Thundercat 600 back caliper which will fit straight on but you need the Tcat hose as well. Thank you for the tip mate but I'm on a really tight budget having to re use as much as possible due to work stopping all overtime with the ineos problems that have occurred recently |
|
|
|
Post by showaddydadito on Nov 7, 2013 8:46:49 GMT
Mick
My Divvy is so far into the corner of the man-cave I could not reach to measure the back disk - so I don't know if this is the right size.
It is a used disk, but still at a usable thickness:
Measurements made with a tape measure, reasonably accurate:
Outside diameter: 265mm The worn part is 34mm wide measuring from the outer edge
The mounting holes: 6 holes, from centre to centre of opposite holes is 150mm.
If it fits, you can have it - where are you?
I might have a pair of D6 forks too - I'll have a look
|
|
|
|
Post by bigmick1981 on Nov 7, 2013 17:34:58 GMT
Mick My Divvy is so far into the corner of the man-cave I could not reach to measure the back disk - so I don't know if this is the right size. It is a used disk, but still at a usable thickness: Measurements made with a tape measure, reasonably accurate: Outside diameter: 265mm The worn part is 34mm wide measuring from the outer edge The mounting holes: 6 holes, from centre to centre of opposite holes is 150mm. If it fits, you can have it - where are you? I might have a pair of D6 forks too - I'll have a look All the 600 rear disks are the same bud so yeah I'd love it off you but would have to pay your postage as I'm up in fife scotland , as much as I'd love the forks aswell I'd imagine the postage costs to Scotland would be pretty horrendous |
|
|
|
Post by showaddydadito on Nov 8, 2013 8:08:44 GMT
Sorry - what I meant about the disk size is that I am not sure whether the one I have is actually a Divvy 600 rear - at the weekend I'll move a few bits and find out for sure.
As for the forks - I had them as part of a job lot of bits, I think one or both may be slightly bent, but even so, all the other bits are there. They aren't going anywhere soon, so let's wait and see if anyone is travelling from here to there sometime.
|
|
|
|
Post by showaddydadito on Nov 11, 2013 9:23:57 GMT
Mick - sorry to disappoint, but when I got the Divvy out, I saw straightway that this is not a Divvy rear disk - I don't know what it came off - it was in a job lot of "Divvy" parts I had free off someone who would otherwise be scrapping them.
|
|
|
|
Post by bigmick1981 on Nov 11, 2013 19:53:08 GMT
Oh well never mind mate but thanks for taking the time and effort to have a look for me
Cheers
Mick
|
|
|
|
Post by bigmick1981 on Dec 1, 2013 21:01:55 GMT
Still looking folks
|
|
|
|
Post by crickleymal on Dec 2, 2013 14:56:01 GMT
Are there any breakers your way? The one down here was selling a complete front wheel for £25. Unfortunately I only needed the speedo drive dog otherwise I would have snapped it up.
|
|
|
|
Post by bigmick1981 on Dec 2, 2013 16:17:21 GMT
It was a rear disk bud , yeah we have a breakers but it's full of Chinese bikes
|
|
|
|
Post by crickleymal on Dec 3, 2013 8:24:55 GMT
If I remember I could have a quick look on Saturday. Do you have a price limit?
|
|
|
|
Post by bigmick1981 on Dec 4, 2013 12:14:06 GMT
My local does them for 5-10 depending on who's working the till . Watching one on eBay but it's at 17 quid just now . Considering buying from China as only 26 new and delivered......tho only 4mm new
|
|
|
|
Post by crickleymal on Dec 4, 2013 13:25:48 GMT
Not worth me bothering then. Specially not with postage
|
|
|
|
Post by bigmick1981 on Dec 4, 2013 17:22:22 GMT
If they have one no harm in asking if you don't mind as I'm getting impatient searching for a cheap one as progress on my rebuild is grinding to a halt. Not convinced about the Chinese import disk with it starting it's life when uk / oem are ending at that thickness.
|
|
|
|
Post by bigmick1981 on Dec 11, 2013 20:42:40 GMT
No longer needed , fzr600 disk as new ........ £17 delivered :-) bargain
|
|
|
|
Post by crickleymal on Dec 12, 2013 9:04:15 GMT
I had to replace the front disc on my ZZR because it had warped slightly. I got one from Sandy Bike Spares (I think that's who) which was a Chinese one. It was, however about 3 mm thicker than the original and was a bit of a pig to fit into the caliper as a result.
|
|
