|
|
Post by teejayexc on Jun 15, 2013 16:03:41 GMT
Anyone know what the fork oil/ air gap, quantities/measurement, is for the thinner forked 38mm '95 D6 please. I seem to have mislaid,or sold, my haynes for the 600  . Whilst you're checking can you tell me what the original fork spring length is supposed to measure too. Tia, Trev. |
|
|
|
Post by alan292 on Jun 15, 2013 17:23:39 GMT
The quantity is 379cc and the level is 111mm.
The standard length of the springs is 476.5mm and minimum is 334 mm.
I have a top and bottom yoke set , hoses and caliper if you are still plan on upgrading ...is the master cyclinder the same ?.... they are still attached to the doner bike I have but my plans include stripping it just shortly.
|
|
|
|
Post by teejayexc on Jun 15, 2013 17:33:10 GMT
The quantity is 379cc and the level is 111mm. The standard length of the springs is 476.5mm and minimum is 334 mm. I have a top and bottom yoke set , hoses and caliper if you are still plan on upgrading ...is the master cyclinder the same ?.... they are still attached to the doner bike I have but my plans include stripping it just shortly. Cheers Alan, you're a star  I've sent you a pm regarding your bits  |
|
.
