|
|
Post by Pagey on Jun 6, 2013 17:02:40 GMT
Here's a little VLOG I did the other day removing the plastic and replacing the headlamp. Hope you like it!
|
|
|
|
Post by teejayexc on Jun 8, 2013 20:23:52 GMT
Nice informative vid for a newbie. Quick tip, when taking the rubber well washers out from behind the screen, it's easier to push them through then try and pull 'em out and risk tearing them ;-)
|
|
Bob H-R
CBT Hero
rediscovering the joys of motorcycling
Posts: 49 
|
Post by Bob H-R on Oct 30, 2013 19:45:24 GMT
In the past i have found that spraying rubber seals or grommets with silicone lubricant brings them back to life.
I had a rowing boat with a cam-operated rubber drain "bung" and it was absolutely solid.I sprayed it and the following day it operated and flexed perfectly normally.
So it might be a good idea to spray any rubber grommets etc with silicone before they get to the stage the chap experienced in the video.
|
|
|
|
Post by silverdave on Oct 31, 2013 20:08:15 GMT
Hi thanks for the video will be useful when I do a bit of work on the front over winter
|
|
|
|
Post by ralphtown on Jan 30, 2014 17:18:32 GMT
Its time to sell it to me,I think  Great vid and you have a lovely view too!! RALPH. |
|
