|
|
Post by adbru on Jun 4, 2013 19:45:51 GMT
Hi Guys,
The clamp which attaches the 2into1 into the silencer (techy description! ) has rotted of.
Can I just get a new clamp or is it better to replace the collector (2into1 bit) ?
Also where do I get them and whats the proper name :-)
Cheers
Adbru
|
|
|
|
Post by rowlf on Jun 4, 2013 21:16:52 GMT
Hi Guys, The clamp which attaches the 2into1 into the silencer (techy description! ) has rotted of. Can I just get a new clamp or is it better to replace the collector (2into1 bit) ? Also where do I get them and whats the proper name :-) Cheers Adbru Sorry, not sure what part you mean (my techy understanding is poor) and you may not be able to replace the bit you need but this page from a parts catalogue should help with the official name and part number.  |
|
|
|
Post by showaddydadito on Jun 6, 2013 14:06:07 GMT
Hi Guys, The clamp which attaches the 2into1 into the silencer (techy description! ) has rotted of. Can I just get a new clamp or is it better to replace the collector (2into1 bit) ? Also where do I get them and whats the proper name :-) Cheers Adbru The "2 into 1 bit" is welded to the pipes - to replace it you need to find someone who can fabricate a new one (stainless of course) for you. If there is enough of the collector in place you can effect a repair by clamping an old beer can round it, with exhaust-putty (gun gum) inside and jubilee clips round the outside. Worked for me for a year till I got a new 4-1 system from Sandy. It may not be pretty, but who's looking down there? |
|
|
|
Post by adbru on May 11, 2015 20:21:41 GMT
Hi All,
Bumping this again as I didn't fix it before :-(
Having used the bike fairly heavily these past few weeks it is now blowing.
Looks like it has rotted under the clamp that holds the silencer onto the 2into1 pipe.
Am I right in thinking that's a new shiny exhaust I need or has anyone repaired these before ?
Thanks in advance
Adbru
|
|
|
|
Post by m40man on May 11, 2015 21:01:45 GMT
Bumping this again as I didn't fix it before :-( Is that because you didn't have a beer can to hand so never got round to it? Or you did, but the bodgetastic solution failed?? I 'fixed' my 600 at the same point by wrapping with exhaust bandage then beer can over that, then a couple of hose clamps to keep it in place. |
|
|
|
Post by CD on May 12, 2015 18:44:09 GMT
Andy at Xtreme Stainless will make new 2-1 collectors.
|
|
