|
Post by Carlos Fandango on Aug 11, 2012 10:53:55 GMT
USE THIS TIP WITH CAUTION ITS A FAIRLY AGGRESSIVE CHEMICAL
I discovered this by accident when cleaning my Diversion I use a chemical wheel cleaner called Wonder Wheels it's amazing stuff apply it to the wheels with a brush wait a few minutes and then rinse it off with a hosepipe it gets rid of all the brake dust and muck really easy, I've used this on all kinds of wheels / brake calipers, with great success, when I was cleaning the wheels on the Yam I also applied some to the front of the engine which it cleaned brilliantly, the Yam has a Stainless Steel Delkevic exhaust and had the usually yellow/brown tarnish. I noticed later that some of the Wonder Wheels fluid had dripped onto the exhaust header pipes and where it had been the surface was like new, I applied some more to the headers and rinsed it off all the tarnish had disappeared (apart from a little heavily engrained stuff which I cleaned off with a Loyblock), a quick five minute polish and they were like new.
I believe there is an acid component in this fluid therefore if you try be sensible and wear appropriate protective gear at least eye protection and gloves.
|
|
|
Post by CD on Aug 12, 2012 16:25:44 GMT
I found Cillit Bang does similar things. But only use it to shift winter muck as don't know what harm it could do.
|
|
|
Post by neilmud Lord Protector on Aug 13, 2012 0:38:14 GMT
Stainless bar & cooker wipes are quite good to but when I can be a$$ed to do the I use Cillit Bang as well but keep it away fron any paint work or you will find rust patches where it touches.
Neil
|
|
sox500c
Boy Racer
1995 XJ900S
Posts: 110
|
Post by sox500c on Aug 15, 2012 14:01:55 GMT
Great tip, I have been avoiding cleaning the stainless exhaust on my winter hack, mainly because I am lazy and if I cleaned the exhaust I'd have to clean the rest of the bike. But I couldn't resist trying the Wonder Wheels. Had some left over in the shed, so I painted it on one downpipe, worked it in and rinsed off. Excellent result, still some ingrained areas but a huge improvement. Finished off the rest of the exhaust with the same results. Now it looks out of place so I'm going to hve to clean the rest of the bike after all > (
|
|
|
Post by meerkat on Aug 16, 2012 11:39:44 GMT
I have used bar keepers friend with great results.
Takes a little work, but doesn't matter if you get it on you or the floor or the paint work. does no harm.
|
|
|
Post by cam7777 on Aug 16, 2012 13:53:36 GMT
I use 20% sulphuric acid mixed with 80% water which brings stainless back to silver again. Just have to remember not to give any away to a certain member on here again in a metal container
|
|
|
Post by CD on Aug 17, 2012 20:53:43 GMT
Citric acid from a homebrew shop might be safer.
|
|
|
Post by max900 on Aug 17, 2012 22:14:13 GMT
I use 20% sulphuric acid mixed with 80% water which brings stainless back to silver again. Just have to remember not to give any away to a certain member on here again in a metal container ;D it is very nice stuff once it gets frothing ;D
|
|
|
Post by cam7777 on Aug 17, 2012 22:26:18 GMT
I use 20% sulphuric acid mixed with 80% water which brings stainless back to silver again. Just have to remember not to give any away to a certain member on here again in a metal container ;D it is very nice stuff once it gets frothing ;D I doubt Trev would agree
|
|