|
|
Post by 43bravo on Sept 11, 2009 16:50:04 GMT
Hi Newbie here Could anyone help please i have removed the swing arm from divvie 900s and i cant get to the bearing on the side with no access the side with the lock nut pivot bolt i believe there is a tool for the job but cant find anything about it has anyone got any advice please.
|
|
|
|
Post by 43bravo on Sept 13, 2009 17:00:21 GMT
ITS OUT THANKS FOR ALL YOUR HELP.
|
|
|
|
Post by Sean on Sept 14, 2009 0:48:59 GMT
....27 people reading it could not help - but if we could have we would have honest!!  right tool for the right job fixed it by the sounds of it... we are a helpful bunch realy....welcome to the board 43bravo...all's well that ends well  |
|
|
|
Post by CD on Oct 2, 2009 19:27:03 GMT
For anyone wanting to know a bearing extractor slide hammer will often work on these jobs.
|
|
|
|
Post by kawasakiinit on Dec 13, 2009 11:49:47 GMT
to get the bearing shell out of my swing arm i used the rear spindle and diff insert/collar thingy as a slide hammer which did the trick .
|
|
|
|
Post by HRHpenfold on Dec 13, 2009 14:55:49 GMT
Not much help now, but when doing mine I made an extraction tool, you put two flats on a washer thats the same diameter as the bearing cage, elongate the center hole on the same plane as the washer untill it will go through the bearing cage, then use a long bolt, washer and socket thats bigger than the bearing but not bigger than the swingarm, file some flats on the bolt, use a adjustable spanner on these flats to stop the bolt turning, wind a nut with a spanner to draw out the bearing  |
|
