|
|
Post by daniel3640 on Feb 25, 2011 7:04:48 GMT
Does any one know the size of the bleed nipples for both front and rear calipers on 98 600?
Thanks
Daniel
|
|
|
|
Post by amorti on Feb 25, 2011 9:23:53 GMT
Not sure on the sizes.
I would strongly advise you to pour plusgas over them daily for a week or more before trying to move them, they tend to break off. Remember to fit rubber caps on the new ones, this helps.
|
|
|
|
Post by daniel3640 on Feb 25, 2011 11:04:51 GMT
I have got the front ones loose but cant budge the rear 2.
|
|
|
|
Post by amorti on Feb 25, 2011 11:54:23 GMT
Plusgas is your last hope! They do have a tendency to snap. If they snap cleanly then they will still seal (unless partially removed). If they snap and still seal then cut your losses, do not ever try to drill them out as you'll damage the seat and then the whole caliper is trash. If only one snaps then you can still do a decent job bleeding the brake with one nipple. If both snap and still seal you can fit one of these: cgi.ebay.co.uk/Banjo-Bolt-Bleed-Nipple-10mm-x-1-25mm-/350437169853?pt=UK_Motorcycle_Parts&hash=item5197aedabdIf one snaps half-out and it ends up leaking, trash the caliper and fit a Thundercat caliper, you will need the longer brake line. |
|
