|
|
Post by stevie16v on Dec 15, 2010 12:32:22 GMT
Discovered a few bits n bobs missing. Looking to find out if anyone knows the sizes, its on a 94 600s
They are
Tank to frame bolt at the headstock end i know is M8, but what length?
Also screen bolt and upper fairing bolt sizes? anyone able to tell me?
cheers
|
|
|
|
Post by amorti on Dec 15, 2010 13:47:06 GMT
The front tank bolt is M6, about 20 (25?) mm long.
The screen bolts are m5, about 20mm long. Best to buy some new wellnuts too.
|
|
|
|
Post by stevie16v on Dec 15, 2010 14:07:53 GMT
brilliant, cheers. i think ill just order a set from ebay that has m5, 6 and 8 in various lengths. comes wuth bolts and washers too  |
|
|
|
Post by teejayexc on Dec 15, 2010 16:47:53 GMT
The front tank bolt is M6, about 20 (25?) mm long. The screen bolts are m5, about 20mm long. Best to buy some new wellnuts too. You sure, I thought it was M8 ?, lengths about right, it's not too critical though, it just screws through a nut anyway. |
|
|
|
Post by stevie16v on Dec 15, 2010 18:33:16 GMT
ive ordered some m8 and m6 aswell as m5 anyway |
|
|
|
Post by amorti on Dec 15, 2010 19:38:15 GMT
The front tank bolt is M6, about 20 (25?) mm long. The screen bolts are m5, about 20mm long. Best to buy some new wellnuts too. You sure, I thought it was M8 ?, lengths about right, it's not too critical though, it just screws through a nut anyway. Been a while since I looked at one, but I am pretty confident. Takes an 8mm socket to undo it, maybe that's confused you? |
|
|
|
Post by stevie16v on Dec 15, 2010 20:03:00 GMT
I've order the hex head dome bolts for it. Wasnt sure what type of bolt was there as it was missing
|
|
