|
|
Post by user1 on May 16, 2010 20:01:55 GMT
Im fed up of finding ive not cancelled my indicators after turning etc. I used to have a Virago which had an auto canceller and I thought of fitting one of these units to the divvy. Has anyone here any advice. Ive tried increasing the power of the bulb (useless) and I dont to use a buzzer.
|
|
|
|
Post by HRHpenfold on May 16, 2010 20:27:46 GMT
|
|
|
|
Post by General Gman on May 16, 2010 20:36:40 GMT
My RD200DX had self-cancelling indicators, too - IIRC, it was on a timer for about 20 seconds, but was also wired into the speedo so the 20 seconds only counted while you were actually moving.Worked a treat..I'm sure FJ's had it, too.
|
|
|
|
Post by m40man on May 16, 2010 21:01:43 GMT
My RD200DX had self-cancelling indicators, too - IIRC, it was on a timer for about 20 seconds, but was also wired into the speedo so the 20 seconds only counted while you were actually moving.Worked a treat..I'm sure FJ's had it, too. So did XS1100s'  . |
|
|
|
Post by teejayexc on May 16, 2010 21:27:02 GMT
My RD200DX had self-cancelling indicators, too - IIRC, it was on a timer for about 20 seconds, but was also wired into the speedo so the 20 seconds only counted while you were actually moving.Worked a treat..I'm sure FJ's had it, too. So did XS1100s' . Think the key words in GM's post were... ''actually moving''....so I take it the XS ones haven't worked yet ?  |
|
|
|
Post by m40man on May 16, 2010 21:31:19 GMT
.... Think the key words in GM's post were... ''actually moving''....so I take it the XS ones haven't worked yet ? Took the XS1100 out for a quick spin yesterday, as it happens  . How's the Strumpet, nice & dry  ? |
|
|
|
Post by teejayexc on May 16, 2010 21:34:28 GMT
|
|
|
|
Post by HRHpenfold on May 16, 2010 21:40:57 GMT
why dont you connect a led to the dash indicator supply and run the cable up the side of the screen and velcroed to the top of the screen, then your more likely to see it, that will only cost a couple of quid and a bit of time to fit |
|
|
|
Post by user1 on May 16, 2010 21:49:06 GMT
Sounds a good plan, will have to pick up both turn indicators somehow
|
|
|
|
Post by Tigger on May 16, 2010 22:41:51 GMT
Did the same on my Fazer. Had one either side of the dash. Worked a treat.
Matt
|
|
|
|
Post by user1 on May 17, 2010 20:48:06 GMT
Thnx 4 the advice Lads, Buzzer no good lad good, two leds better.
|
|
|
|
Post by HRHpenfold on May 17, 2010 21:12:30 GMT
Thnx 4 the advice Lads, Buzzer no good lad good, two leds better. if you take the supply from the indicator relay, then only one LED is needed, theres only two connections, one will work, the other not |
|
|
|
Post by user1 on May 17, 2010 21:34:41 GMT
Aha better stil cheers  |
|
. How's the Strumpet, nice & dry 
?
