|
|
Post by softouch on Apr 21, 2010 17:53:03 GMT
Can someone please tell me the correct plug lead cabling for the 600 diversion?
I am just changing the coil packs and have no markings on the old ones?
|
|
|
|
Post by bobh on Apr 25, 2010 19:02:36 GMT
As no-one else has replied I thought I'd better try to help.
According to Haynes the L.T. side wiring (for all models) is :
Red - Common
Grey - coil for cyls 2 & 3
Orange - coil for cyls 1 & 4
I had a quick look at my bike (a '99 600N) but it's impossible to see the layout of the H.T. leads without taking at least the tank and air filter off. Maybe someone else who's d0ing a bit of maintenance in that area can help?
Hope that goes some way towards answering your query.
|
|
|
|
Post by CD on Apr 25, 2010 20:14:50 GMT
The HT leads will be copper core with a resistor cap. Solder joint the cable, lots of self amalgamating tape and heat shrink sleeve over the top. Unfortunately they are bonded into the coil so any problems close to the coil means a new coil.
|
|
