|
Post by dxtans on Aug 19, 2009 9:27:39 GMT
Hello, One of my front forks dust /rubber covers seals has come away from the bottom half of the fork.
The seal cover is still intact, but was wondering what type of sealant is used to secure the seal back in place to the bottom half of the fork.
thanks dxtan
|
|
|
Post by CD on Aug 19, 2009 11:20:17 GMT
The dust cover might have split - I believe they just push on. You could put a zippy cable tie around it.
|
|
|
Post by Padster on Aug 19, 2009 12:42:32 GMT
They are a push fit. Unless it has split it should go straight back in.
|
|
|
Post by dxtans on Aug 19, 2009 18:35:04 GMT
OK got that, When they were put on, the mechanic must have used some form of glue. I've peeled this off an you're right it pushes back in.
thansk dxtans
|
|