|
Post by andypat on Jan 7, 2023 5:58:13 GMT
Hi, new member here
i'm having trouble fitting the engine back into frame of the 900s. any tiPs or clues are appreciated
cheers
Andy from Oz.
|
|
|
Post by chris900divvy on Jan 9, 2023 6:36:25 GMT
Hi Andy, when I put mine in last after replacing gearbox I found the problem was with the universal joint linkage to the shaft. That needs to be put in the correct position for the engine to be able to line up properly with the mounting points on the frame. I think wiggling it around by removing the bevel box at the end of the shaft was what I needed to do, just in order to get the universal joint into the beginning of the swingarm. If thats into the swingarm the rest of it should then line up ok. Hope this helps.
Chris
|
|