tigg
Newbie
Posts: 6
|
Post by tigg on Mar 15, 2014 11:27:12 GMT
hi guys and gals, I have a problem with my D600. When I hit the starter button all I get is single click from the starter solenoid. After futtering about with the bike for a while I discovered that if I rock the bike in gear then hit the start button the engine bursts into life. It then starts off the button in neutral maybe once or twice then back to the clicking solenoid with no engine turn over. Could it be the starter motor is the culprit. Any ideas would be appreciated.
|
|
|
Post by teejayexc on Mar 15, 2014 12:31:23 GMT
|
|
|
Post by Deleted on Mar 15, 2014 19:36:38 GMT
Have you tried holding the starter button in whilst tapping the starter motor with the end of a hammer handle or large screw driver? This little trick got my bike spinning over today assuming its a problem with the starter motor itself?
|
|
tigg
Newbie
Posts: 6
|
Post by tigg on Mar 16, 2014 10:52:08 GMT
Thanks guys for the replies. I will have a look at it today weather permitting and check out your suggestions. cheers.
|
|