|
Post by kempie657 on Jul 21, 2012 22:03:46 GMT
Hi everyone iv got a 1998 diversion s it has a motad style exhaust im not sure of the make as theres no brand or markings on the can. I would like to fit an aftermarket silencer can this be done and would it just slip on ( as much as id like to i have no mechanical knowledge). Im looking at a can at the moment it has a 54mm pipe would this or could this fit. Cheers Paul
|
|
|
Post by christhedivvy on Jul 22, 2012 8:09:30 GMT
Is it a 600 or 900 divvy?
You'll have to measure the link pipe to your current exhaust and see if it's of a similar size
|
|
|
Post by m40man on Jul 22, 2012 8:10:53 GMT
I think you're going to have to take off the existing can & measure the down-pipe aperture. Though if you post a pic here, someone might recognise it & know.
EDIT:Too slow - I should re-name myself Tortoise!
|
|
|
Post by Sean on Jul 22, 2012 8:19:09 GMT
I think you're going to have to take off the existing can & measure the down-pipe aperture. Though if you post a pic here, someone might recognise it & know. EDIT:Too slow - I should re-name myself Tortoise! the wheels fallen off your waggon...again Martin!! ;D it is better to be helped twice than not at all!! ;D
|
|
|
Post by kempie657 on Jul 22, 2012 8:40:19 GMT
Thanks for your advice guys the more help the better in my opinion . I have a 600, i will do my best to get a pic up as i only have an iphone.
|
|
|
Post by CD on Aug 6, 2012 18:33:00 GMT
If you are near Stafford, Xtreme Stainless at Hixon are good for bike exhausts. They are nearby but not connected with OS Stainless.
|
|