|
|
Post by petethefeet on May 30, 2008 20:14:26 GMT
Anyone any info about nothing happening at all when trying to start bike. Batterys ok. Could it be oil level switch or side-stand switch. Any clues. (new member first time on)
|
|
|
|
Post by El Fuego on May 30, 2008 20:26:52 GMT
You'd be better off posting this in the technical section or the General section.
|
|
|
|
Post by teejayexc on May 30, 2008 20:45:18 GMT
|
|
|
|
Post by El Fuego on May 30, 2008 21:27:20 GMT
I was giving a quick response before I had to go out for a while. Didn't have time to be as verbose as usual. Anyway, not everyone's as tetchy as you.  (joking - I love you really. ;D ) |
|
|
|
Post by teejayexc on May 30, 2008 21:29:53 GMT
Not in a Pooh way I trust  |
|
|
|
Post by CD on Jun 9, 2008 10:33:16 GMT
Methodically go through all the easy stuff and work up to the harder/expensive bits.
Battery tested & bike tried with jump leads (other engine NOT running)
Solenoid clicking/not clicking
Motor brushes
Switches on side stand and clutch
Etc
|
|
|
|
Post by darren on Jun 13, 2008 18:43:23 GMT
illimanate the side stand swich and clutch by crossing the wires from the harness this will give a perminent contact
|
|
|
|
Post by bighairymuppet on Jun 13, 2008 23:10:41 GMT
check fuses first. if the starter not turning check for click noise if the solenoid is clicking try tapping the starter with hammer (harder than you think) if the starter turns its the starter ( prob brushes). If there's no click may be battery or solenoid. Other causes sidestand switch or faulty cutoff switch.
|
|
|
|
Post by bighairymuppet on Jul 6, 2008 17:37:58 GMT
fyi my starter was celaned out today and runs perfectly worth a go if you think its the starter (mine had got to point where even tapping with hammer wouldnt work).
|
|
, the kill switch is off? 
(joking - I love you really. ;D )
