|
Post by bikernick on Apr 13, 2012 9:40:09 GMT
. When I went to start my 600 divvy yesterday all i got when i pushed the starter was the oil light came on. Could hear no sound and she didn't attempt to start. However a quick push down a hill and she bumped, and rode, fine. Any ideas as i'm at a loss? She's at a garage today having her fork seals replaced so cant do much at the mo but I've got till Sunday to make her start properly as need for work. Many Thanks?
|
|
|
Post by HRHpenfold on Apr 13, 2012 10:48:11 GMT
. When I went to start my 600 divvy yesterday all i got when i pushed the starter was the oil light came on. Could hear no sound and she didn't attempt to start. However a quick push down a hill and she bumped, and rode, fine. Any ideas as i'm at a loss? She's at a garage today having her fork seals replaced so cant do much at the mo but I've got till Sunday to make her start properly as need for work. Many Thanks? its either the side stand switch, or the starter solenoid, it's likely to be one of the wires to the solenoid, corroded!
|
|
|
Post by bikernick on Apr 13, 2012 17:56:36 GMT
Ok thanks. Have all day tomorrow so will take a look. I'll report how i get on once I've finished.
|
|
|
Post by teejayexc on Apr 13, 2012 18:24:39 GMT
|
|
|
Post by bikernick on Apr 16, 2012 19:27:15 GMT
Hi guys. Thanks for all your help. I've found today that by bridging the two connections on the starter relay I could make my bike start. Sorry for being thick but do I need to replace it, or another part of the system? I still only get the oil light on if I press start button. Any ideas?
|
|
|
Post by CD on Apr 17, 2012 16:35:13 GMT
Martin's right. Take the connectors apart and replace any corroded terminals.
|
|