|
|
Post by christian413 on Apr 2, 2012 8:34:08 GMT
hi
started my bike. every thing was fine. elec was on engine warming up. then she just cut out with out me touching it.
now there is no sign of life. not power to any lights or anything.
batt is fine pushing out volts. fuses look fine too. is there anything else is should check??
Thanks Christian
|
|
|
|
Post by teejayexc on Apr 2, 2012 9:48:18 GMT
Sidestand switch?
|
|
|
|
Post by Deleted on Apr 2, 2012 10:08:27 GMT
No lights ? Does a D6 switch the lights off when you put the stand down ? |
|
|
|
Post by m40man on Apr 2, 2012 10:52:32 GMT
No lights ? Does a D6 switch the lights off when you put the stand down ? Lights would stay on. |
|
|
|
Post by verde on Apr 2, 2012 14:58:59 GMT
Main 30 Amp fuse. if all elecs gone
|
|
|
|
Post by m40man on Apr 2, 2012 15:43:27 GMT
Main 30 Amp fuse. if all elecs gone Or a loose battery connection (I would know about that  ). |
|
|
|
Post by CD on Apr 4, 2012 18:32:34 GMT
Get the voltmeter out & start prodding wires. Failing that a 12V bulb and some spare wire. Batteries can fall apart internally or get totally flattened if something was left switched on or the generator reg has failed to earth. A totally flat battery will probably need an Optimate to kick start it. But if its elderly, a new one is probably a better get.
|
|
|
|
Post by Sean on Apr 5, 2012 8:42:32 GMT
The prod and pull all leads method will surley find the problem - my money is on a connection - start at the key barrel and work you way from the handle bars to connectors under the tank (take it off) to the battery ,fuses etc....
Good luck.
|
|
|
|
Post by newell on Apr 5, 2012 14:10:36 GMT
Yeah, the obvious place to look suspiciously at is the 30A Main Fuse and the connections to and from. But my money is on that Ignition Switch  |
|
).
