|
|
Post by mtttr on Sept 2, 2011 20:43:20 GMT
Hi has anybody got a guide to tappet shimming mine needs doing and being a student im to cheap to give it to a shop
Xj600s 1995
Many thanks all.
|
|
|
|
Post by bobh on Sept 2, 2011 20:57:16 GMT
It's all in Haynes.
I know some unscrupuous people find links to download a free copy, but as a respectable law-abiding citizen I couldn't possibly condone such behaviour.
|
|
|
|
Post by mtttr on Sept 2, 2011 22:58:44 GMT
ok ta will order a haynes asap thanks again.
|
|
|
|
Post by showaddydadito on Sept 8, 2011 7:30:23 GMT
mttr - here's a tip on how to get a better level of help.
If you're an impoverished student with no Haynes you might be able to borrow one off an impoverished person who has one.
If you put some idea of location on your profile, then you might find someone who lives close by and can lend you the Haynes.
I would be quite happy to lend you mine if you live close by.
|
|
|
|
Post by mtttr on Sept 9, 2011 22:34:33 GMT
just about sorted have all my measurements and know what shims i need hope to get them tomorrow before work and fit them after work. Also bought the shim tool £29.62 and a piece of shite that is doesnt work to great but found a method to make it work. also found a couple off missing well nuts now replaced so hopefully less vibes. And scarily inlet port 3 is just off from touching by 1 thou eek. And still loving the bike its great  |
|
|
|
Post by mtttr on Sept 10, 2011 23:08:27 GMT
will be picking shim up tomorrow sadly this means using that poorly designed tool lol
|
|
|
|
Post by mtttr on Sept 11, 2011 20:30:48 GMT
All done and checked over the bike washed under fairing ready to do an oil and filter change next sunday.
|
|
