|
Post by littlejohn99 on Mar 31, 2014 15:57:23 GMT
Hi. My first post as I'm new here. My indicator switch died. Sometimes the indicators worked, sometimes not, then the horn button and flash button fell out. I've tried 2 replacement switches but only the left indicators work. is this a coincidence that the switches are faulty or could there be a problem on the bike? When they were working, they both worked. Any good ideas? Cheers
|
|
|
Post by max900 on Apr 7, 2014 20:07:15 GMT
Hi. My first post as I'm new here. My indicator switch died. Sometimes the indicators worked, sometimes not, then the horn button and flash button fell out. I've tried 2 replacement switches but only the left indicators work. is this a coincidence that the switches are faulty or could there be a problem on the bike? When they were working, they both worked. Any good ideas? Cheers
you say youve tried 2 new switches do you mean the actual buttons you push or do you mean youve changed the entire switchgear(as in the horn/indicators/flasher section) if you have only changed the switches this wont make a lot of difference as its the contacts inside that either work or dont
|
|
|
Post by CD on Apr 8, 2014 22:35:07 GMT
If the indicator switch is goosed the others may not be much better so a new switch block may be the best answer. Before you buy check the loom connectors for corrosion.
Sent from my phone with mangled spelling
|
|
|
Post by showaddydadito on Apr 9, 2014 9:31:17 GMT
My indicators work, then don't work, then work, then don't work, then work, then don't work . . . . . . . .
|
|
|
Post by johnnybgood on Apr 9, 2014 9:53:30 GMT
Thanks for the reply. I like the joke about they work and they don't! Turns out there were two problems at the same time but I couldn't see! The switch gear was dead but at the same time the flasher relay was on the blink.....or not! Replaced that and the switch and all is well the world again, well, with the bike anyway. Cheers
|
|