stone
CBT failure
Posts: 20
|
Post by stone on Mar 22, 2014 10:50:07 GMT
Theres 0 clunking now, but the bearings seem fine not worn so will try to take a few degrees of tension off the head bearing and see how it changes. Would be perfect if I could even get that out, then all my nagging is done and the bike is superb.
|
|
|
Post by CD on Mar 22, 2014 10:54:38 GMT
Slack head bearing until loose then tighten until resistance is felt. Steering should feel free but not loose.
Sent from my phone with mangled spelling
|
|
stone
CBT failure
Posts: 20
|
Post by stone on Mar 22, 2014 13:14:15 GMT
Much better now, if it will settle a bit more it will need a few degrees more tension but because its not a new bearing it shouldnt settle much. Perfect
|
|