crazy
Harley Rider
Posts: 76
|
Post by crazy on Nov 5, 2013 14:49:13 GMT
I'm in the process of building another trike, but need longer pivot pins. I can't find any info about the tread on them.
Am I right in suspecting that they are M22 x 1mm pitch thread?
Cheers
|
|
|
Post by sledgegreen on Nov 6, 2013 8:24:15 GMT
|
|
|
Post by bobh on Nov 8, 2013 22:00:36 GMT
Sorry, I recently got rid of a load of bits, including some pivot pins, to Max900. Maybe if you ask him really nicely?
|
|
|
Post by max900 on Nov 9, 2013 10:05:13 GMT
Sorry, I recently got rid of a load of bits, including some pivot pins, to Max900. Maybe if you ask him really nicely? i will have to take your word for that Bob haven't had chance to sort through the big box full of small bits what am i looking for ??
|
|
|
Post by bobh on Nov 9, 2013 17:07:59 GMT
A couple of things that look like plugs with a thread (possibly M22 x 1!) on one end. I think one has a fixed hexagon and the other a locknut. The plain, unthreaded portion fits inside the swing arm bearings.
Thanks Max - Bob
|
|
|
Post by max900 on Nov 24, 2013 20:31:12 GMT
A couple of things that look like plugs with a thread (possibly M22 x 1!) on one end. I think one has a fixed hexagon and the other a locknut. The plain, unthreaded portion fits inside the swing arm bearings. Thanks Max - Bob yep i do believe i have some of those short ish bolts but Fat i will try and have a look in the week as you can tell im not rushing to sort through the box
|
|
crazy
Harley Rider
Posts: 76
|
Post by crazy on Dec 15, 2013 18:56:12 GMT
This is now sorted. Found that they're the same thread as Mercedes lorry wheel studs, 22x1.5. So bought a couple I wheel studs to machine down.
|
|